Tools List

Please note-Items with bold numbers are available in a quantity up to the number specified behind the description.

ID/New/Pics	Price	Description
Category 005 - Other turning tools and related
005.515	$ 49.00	Part to use with some Swiss turns, 6.5mm o.d. shaft with a free pully which use is unknown to me, xlnt.
005.564	$ 6.00	Pivot drills, flat style, Swiss made, nos from the early 1950s, size 0.42mm, 12 pieces, some surface rust but cutting areas look mostly good. (Quantity 5)
005.565	$ 6.00	Pivot drills, flat style, Swiss made, nos from the early 1950s, size 0.50mm, 10 pieces, very slight surface spots possible on shanks.
005.567	$ 6.00	Pivot drills, flat style, Swiss made, nos from the early 1950s, size 1.05mm, 10 pieces, slight surface spots possible on some. (Quantity 10)
005.570	$ 6.00	Pivot drills, flat style, Swiss made, nos from the early 1950s, size 0.60mm, 12 pieces, some surface rust, cutting areas look mostly good, priced to sell, p&i. (Quantity 4)
005.571	$ 6.00	Pivot drills, flat style, Swiss made, nos from the early 1950s, size 0.95mm, 12 pieces, some surface rust, cutting areas look mostly good, priced to sell, p&i. (Quantity 7)
005.582	$ 7.00	Pivot drills, flat style, Swiss made, nos from the early 1950s, size 0.40mm, 12 pieces, nm. (Quantity 1)
005.584	$ 10.00	Pivot drills, very old flared flat style, Swiss made, nos with slight spots possible, size 0.90mm, 10 pieces. (Quantity 8)
005.587	$ 10.00	Pivot drills, very old flared flat style, Swiss made, nos with slight spots possible, size 0.90mm, 10 pieces. (Quantity 3)
005.592	$ 7.00	Pivotting drills for your old turns or use with lathes and other equipment, #6, very old quality, pkg of 6 pc., Swiss. (Quantity 7)
005.593	$ 7.00	Pivotting drills for your old turns or use with lathes and other equipment, #6 1/2, very old quality, pkg of 6 pc., Swiss. (Quantity 8)
005.594	$ 7.00	Pivotting drills for your old turns or use with lathes and other equipment, #2 , very old quality, pkg of 6 pc., Swiss. (Quantity 9)
005.595	$ 7.00	Pivotting drills for your old turns or use with lathes and other equipment, #2 1/2 , very old quality, pkg of 6 pc., Swiss. (Quantity 5)
005.596	$ 7.00	Pivotting drills for your old turns or use with lathes and other equipment, #7, very old quality, pkg of 6 pc., Swiss. (Quantity 5)
005.597	$ 7.00	Pivotting drills for your old turns or use with lathes and other equipment, #7 1/2, very old quality, pkg of 6 pc., Swiss. (Quantity 10)
005.598	$ 7.00	Pivotting drills for your old turns or use with lathes and other equipment, #8 1/2, very old quality, pkg of 6 pc., Swiss. (Quantity 7)
005.599	$ 7.00	Pivotting drills for your old turns or use with lathes and other equipment, #5 1/2, very old quality, pkg of 6 pc., Swiss. (Quantity 7)
005.607	$ 14.00	Balance (balloon) chuck, smaller size for ww, vgc or better, old quality, fits in your #50 collet.
005.654	$ 9.00	Vigor Swiss Graver/file/broach holder, double ended, screw adjust, nickel plated, for smaller and larger sizes, each end can be reversed quickly for 4 total sizes, xlnt/nm. Looks like the top one in the picture.
005.657	$ 7.00	Norton 2 inch coarse abrasive stone wheel on reusable arbor which you hold with a 4.8mm (#48) wire collet, vgc.
005.667	$ 6.00	Jasper polishing slip, left tilt, xlnt, 1 3/16 inch long by 1/4 inch wide. Ready for your holder.
005.676	$ 6.00	Graver/file/broach holder, screw adjust, General Tool Co #94-D, xlnt, large size,
005.719	$ 7.00	Graver/file/broach holder, screw adjust, Swivel top, General Hardware, USA, xlnt, large size,
005.729	$ 11.00	Large Jacobs chuck, Multi-Craft, xlnt, theaded inside for your 3/8 inch arbor, USA made, cap 1/16 to 3/8=U4G61=3/8-24 thread..
005.747	$ 6.00	Shop made steel tools, shorter one has a steel tapered end with a flat side and rounded side for burnishing, the longer piece is a center prick punch, xlnt.
005.753	$ 9.00	Small saw arbor, will hold stones up to 3mm thick also.
005.787	$ 14.00	Muller New York, gravers, 3 different, top old quality, includes 3 wooden handles handles also. Picture shows one lot, each lot may be slightly different. (Quantity 3)
005.804	$ 10.00	Hard rubber wheel on tapered arbor for turning with your lathe.
005.806	$ 12.00	Three wheels for different turning operations, wooden one without arbor, smaller wheel with arbor is metal and one coarse stone with arbor. good used condition.
005.814	$ 10.00	Jasper slip, 1/4 inch triangle, 1 3/4 inches long, it has been mis-used and has ncks on all 3 sides, there is good clean unbroken areas to work with.

ID/New/Pics	Price	Description
Category 006 - Abrasives, stones, cutting tools, broaching tools
006.565	$ 5.00	Screw type tool with one pin vise jaws and one jaws for holding gravers, files or broaches, vgc.
006.1122	$ 7.00	Pivot drills, flat style, Swiss made, nos from the early 1950s, size 0.58mm, 10 pieces, nm. (Quantity 8)
006.1123	$ 19.00	Double ended cutters with one bevelling cutter end and one 3 corner type cutting end, vgc or better, 3 different sizes, pictures show samples. (Quantity 2)
006.1124	$ 19.00	Double ended bevelling cutters, 3 different sizes, vgc or better. Pictures show samples of the items in these lots. (Quantity 2)
006.1131	$ 18.00	Two Double ended cutters one with both ends for bevelling and one with one bevelling cutter end and one 3 corner type cutting end, vgc or better, 3 pc. total.
006.1165	$ 5.00	Crown tap, 1.10mm, nos from defunct Marshall Company, old quality. (Quantity 4)
006.1187	$ 18.00	Martin Swiss specialized screwplate #8, 8 holes with double cut out slots for correcting break offs, has the letters O, F and C and numbers 10, 11, 12 and 45.
006.1191	$ 5.00	Graver/file/broach holder, foll size, screw adjust, vgc.
006.1234	$ 5.00	Taps, larger sizes as shown in the picture, xlnt/nm/nos although some may have surface storage rust spots, most do not. Lot of 6 different, our choice, old quality. One picture shows one of the lots. (Quantity 7)
006.1319	$ 6.00	Grobet Yellow sanding discs #10.714, NEW , 100 per box, 3/4 inch diameter, coarse, p&i. (Quantity 11)
006.1321	$ 6.00	Vigor BF-1001 knife hard wheels, 12 pc pkg, 1/2 x 1/8 innch, NEW, sealed package of 12. (Quantity 4)
006.1322	$ 4.00	Grobet #11.463 Pumice wheels, white with knife edge for your arbor, 5/8 inch, 3 dozen, New from old stock. (Quantity 3)
006.1326	$ 6.00	Stone wheel on 3/8 inch daimeter arbor, coarse, vgc, stone is 2 inches o.d.
006.1327	$ 6.00	medium fine grit stone on arbor, 2 inches o.d., vgc
006.1391	$ 12.00	Set of 5 round stones, 4 are mounted on arbors, good used condition, variety of coarse ness, average very good condition.
006.1392	$ 12.00	Lot of 7 round saw blades, used, assorted sizes and thickness, one has some chips. Sold AS IS.
006.1406	$ 6.00	Stone wheel on arbor which will fit your #49 or 50 collet, medium coarse, vgc, stone is 2 inches thick and 2 inch outer diameter. Picture is one of the two listed.
006.1414	$ 22.00	Craftsman vintage old quality USA made set of Electricians taps and drills set with 5 each of taps and drills and T handle tap wrench. Tap Sizes are inside the case as 4, 6, 8, 221/4-20 with more info on ech tap also, drill go with the tap sizes and are also p&i.. Plastic case is original, hinges are broken.
006.1420	$ 14.00	Norton Grindwell grinding wheel #39C 120 K6 VK, 150x25x31.75 V 129, max safe speed is 4200, also has F7 on the label, near mint with box, 6 inch diameter, 1 inch thick,, medium fine grit approx.
006.1434	$ 12.00	Cutting tool with center, 2.7mm cutting tip, vgc.
006.1435	$ 21.00	Screw taps, sizes mostly for pocket watches and clocks, surface rust on all 19 taps, assorted brands, most have identification, USA and Swiss made on most.
006.1453	$ 4.00	Pivot broaches, new, old stock, Special buy, 12 pieces, very thin wrist watch sizes, never used. All broaches may be the same size per lot. (Quantity 14)
006.1498	$ 7.00	Spade drills, 4 of them for wristwatch, pocket watch and clock use, xnlt condition.
006.1508	$ 14.00	Like new case opening tools with 2 different gripping ends, like new condition.

ID/New/Pics	Price	Description
Category 009 - Hand tools not in other categories
009.905	$ 9.00	Combination case opening blade and adjustable slot opening for some screw backs, vgc/xlnt, will fit in pocket.
009.987	$ 5.00	Movement holder, quick adjust type, metal, for small to medium round and oval ladies ww movements, vgc. (Quantity 9)
009.1581	$ 5.00	Sliding gauge, brass, 0 to100 mm and 0 to 4 inches, excellent condiition, brass.
009.1863	$ 4.00	SUC lens for their headpiece, 2 1/4 magnification, nos, p&i.
009.1880	$ 4.00	Diagonal nipping pliers, 4 inches, for lighter cutting, gc+.
009.1890	$ 21.00	Gruen signed hand removers, wooden handle with hinged slide unit, very good used condition. Picture is a sample, same tool.
009.1931	$ 3.00	Steel 6 inch rule with pocket clip, vgc or better. (Quantity 1)
009.1988	$ 6.00	Bench block, steel, 41mm x 18mm, has holes for multiple uses.
009.2049	$ 3.00	Rivetting stake, also known as a Strip anvil, 10 holes on each side, steel, step for holding in your vise, vgc.
009.2067	$ 12.00	Weight axle punch for Rolex gents models, 3.5mm o.d. end, likely fits 3035 and 3135 models, not genuine, vgc/xlnt.
009.2085	$ 5.00	Round nose pliers, stainless steel, Pakistan, 5.5 inch, xlnt.
009.2093	$ 3.00	Chain nose pliers with serrated jaws and padded grips, 5 inch, vgc, Korea, heavy duty.
009.2106	$ 12.00	White plate for your Hairspring vibrating tool, 37.8mm o.d., vgc.
009.2109	$ 6.00	Rivetting stake, also known as a Strip anvil, 15 holes, steel, step for holding in your vise, vgc.
009.2156	$ 7.00	Link opening pliers, Peer, USA, vgc/xlnt, old quality, 5.5 inches.
009.2169	$ 12.00	Weight axle staking punches for Rolex automatics, 4mm o.d. ends, unsure of model it fits, not genuine, one is vgc and one has bad spots.
009.2178	$ 12.00	Pliers for punch marking objects, screw adjust punch and screw stop, old quality, vgc.
009.2222	$ 3.00	Stainless steel tweezers, sturdy with serated grip inside the tip, vgc/xlnt, 4.75 inches long. (Quantity 2)
009.2288	$ 18.00	Craftsman hand held micrometer, 0-1 inch with very small incraments, vgc.
009.2383	$ 4.00	Sliding gauge, brass, 0-80mm and 0-3 inches, vgc, reads like a vernier, measure up to 3 inches and 80mm, vgc.
009.2519	$ 19.00	Hole punching pliers, very old, vgc, 2 adjustable pushers are double ended.
009.2521	$ 5.00	Crown thread gauges, one each for 1.20mm (#6) and 1.30mm (#5), nos, p&i. (Quantity 7)
009.2522	$ 5.00	Crown thread gauges, one each for 1.40mm (#4) and 1.80mm (#10), nos, p&i. (Quantity 5)
009.2547	$ 4.00	Sliding gauge, brass, shows 0-4 inches by 16ths, measures inside and outside.
009.2553	$ 5.00	Round nose pliers, 5 inch size, rubber grips, Japan made, vgc.
009.2554	$ 3.00	Tapered scraper type steel blade with wooden handle, vgc.
009.2592	$ 12.00	Weight axle staking punch for Rolex automatics, 3.85mm o.d. ends, unsure of model it fits, not genuine, vgc/xlnt.
009.2593	$ 12.00	Weight axle staking punch for Rolex automatics, 4.15mm o.d. ends, unsure of model it fits, not genuine, vgc/xlnt.
009.2625	$ 7.00	Sliding gauge, measures inside and outside by 8th and 16th inches up to 4 inches, all metal, German made, old quality, vgc, good for crystals, bezels and more.
009.2636	$ 6.00	Steel rest with 28.40mm opening, stem slot and hole in the center, vgc/xlnt.
009.2638	$ 12.00	Antique hand held micrometer, USA, up to one inch with table on handle, vgc.
009.2639	$ 12.00	Hand held micrometer, USA, measures between one inch to 2 inches, vgc.
009.2718	$ 4.00	Flat steel stake with 20 holes, shop made, 3.3mm thick, 73x21mm.
009.2722	$ 12.00	Brass tool which looks like an assembly block for balance units in a factorywell made, sturdy, xlnt. If you know what it is if not what I think, let me know.
009.2734	$ 8.00	Brass double ended pin vise and graver/file/braoch holder, screw adjust, vgc.
009.2782	$ 3.00	Vigor No. PL-162, chain nose pliers with padded grips., Pkistan, vgc.5.25 inches.
009.2790	$ 4.00	Utica side cutting pliers, USA, 5 inches, gc+.
009.2795	$ 4.00	Pliers set of 2 pair, all 4.5 inches with padded grips and are anodized, smooth flat nose and side cutters, vgc, Pakistan made.
009.2796	$ 3.00	Pliers with bent type needle nose, smooth jaws, 4.5 inches, Pakistan, vgc.
009.2847	$ 6.00	Gemco, Italy, pliers, flat nose, smooth jaws, 4.5 inches, vgc/xlnt. (Quantity 2)
009.2861	$ 6.00	Gemco, Italy, pliers, flat nose, serrated jaws, 4.5 inches, vgc or better.
009.2881	$ 6.00	End cutting tweezers, pattern D, use as is or buyer can dress edges to suit, no holes.
009.2886	$ 8.00	Steel head rivetting type hammer with wooden handle, 3 inch long head and 10 inch long handle, old quality, vgc.
009.2922	$ 2.00	Vigor pattern AA tweezers, xlnt, stainless steel, packaged, India.
009.2947	$ 9.00	Bergeon screwdriver size 80, very good used condition.
009.2955	$ 9.00	Dental picks, 5 different, 3 are double ended, assorted uses. (Quantity 2)
009.2958	$ 3.00	Scraper, straight edged 3 sided steel with wooden handle, vgc.
009.3003	$ 12.00	Goodell-Pratt Hand held micrometer, measures from 0 to One inch by increments, 6.5mm o.d., measuring surface, vgc, USA.
009.3042	$ 8.00	Steel Degree gage with 0 to100mm by tenths, good tips will measure most anything, vgc or better.
009.3159	$ 11.00	Third Hand work holders, 3 of them, as shown, vgc or better, 2 made in Japan and one in China, magnifying glass may be bad, small one is missing the Alligatoy clip.
009.3162	$ 5.00	Steel bench block, approx. 2 x1 3/4 x1/2 inches with a 1/4 inch hole in the center.
009.3169	$ 4.00	Pliers, Long flat nose, smooth jaws, padded grips, return spring, 5 inches, good quality, xlnt.
009.3225	$ 20.00	Aluminum adjustable movement holder for gents and ladies wristwatches, best for bagutte and straight edged models, vgc.
009.3272	$ 5.00	Utica Toll Co. Flat nose pliers with serated jaws, 4.5 inches, good quality, vgc.
009.3273	$ 6.00	Mini size smooth jaw chain nose pliers with padded grips and return spring, 3 inches long, near mint condition.
009.3280	$ 12.00	Large sliding gauge, does inside and outside to 4 inches by 32nds and 64ths, USA made, xlnt.
009.3283	$ 9.00	Clamp for multiple uses, old, vgc.
009.3291	$ 8.00	Specialty holder with slide lock, as shown, vgc.
009.3302	$ 5.00	Small soldering rod with wooden handle, useful, vgc.
009.3314	$ 24.00	Specialty pliers, small, very old, not sure of their uses, see pictures and decide. Picture is of a like item, same style, etc.
009.3317	$ 7.00	Adjusting keys for drills, flex shaft, etc., three different, good used condition.
009.3324	$ 6.00	Utica USA pliers altered to hold wire and other items, vgc.
009.3325	$ 7.00	Hole punching tool with 2 sizes, screw control, hole sizes are approx. 1.6mm and 2.3mm, vgc.
009.3328	$ 6.00	Solid straight blade scraper, 2 3/4 inh long 3 corner steel, good size wooden handle, vgc.
009.3357	$ 9.00	Hole punching pliers, old, vgc.
009.3368	$ 9.00	Hammer with built in screwdriver blade and center punch/scriber point in the handle, xlnt, well made.
009.3371	$ 5.00	Fleming thickness gauge No. 1340 for very small thickness, USA made, blades with siizes to detrmine a thin thickness, vgc or better in original package.
009.3395	$ 12.00	Lampert Swiss pattern D end nipping tweezers, vgc, ends could use a little dressing.
009.3423	$ 4.00	Key for Jacobs style chucks, #7, vgc.
009.3428	$ 39.00	Stepped holding device similar to a bezel chuck, 4 sizes , screw adjust, back side has a 23mm wide raises cicle with a 10mm hole for monting or holding, appears to be shop made, very good used condition or better.
009.3458	$ 55.00	Xacto X5087 Deluxe Hobby Tool Set in wooden case with 32 tool pieces, includes knives, blades, screwdriver, block plane, block sanderrouters, Gouges, pin vice, drill bits and Coping Saw. Like new set at a very fair price.
009.3577	$ 8.00	Link opening and closing pliers, Japan made, 4.5 inches, very good working order, will also cut slots in some metals.
009.3586	$ 5.00	Pliers, 4 inches long, jaws are rounded inside and have specialized altered tips. Very good used condition.
009.3613	$ 8.00	The Pocket Chum sliding cliper gauge, inside /outside measurement in inches and millimeters, very good used condition with a chart on the back.
009.3634	$ 199.00	Bergeon Tesa sliding gauge and Micrometer set in wooden case with wrenches and instructions, top quality Swiss et, near mint condition.
009.3664	$ 11.00	Milling tools, one large size and one double ended smaller size, good quality.
009.3668	$ 5.00	Rivetting stake, also known as a Strip anvil, 14 holes on each side, steel, step for holding in your vise, good used condition.
009.3678	$ 6.00	Swiss Quick-adjust movement holder for small ladies watches, very good used condition.
009.3689	$ 3.00	Small size pin vise, good for smaa pivot broches, possibly some stems, etc. Priced per each. (Quantity 5)
009.3690	$ 14.00	Large and Medium size Dixon made Pin Vises, good quality, very good used condition, many uses.
009.3691	$ 21.00	3 very old pin vises with wooden handles, all will work well, hard to find.
009.3693	$ 12.00	Double ended stem holder for secure holding while cutting/dressing threads, very good working condition for all sizes of stems. Buyer will get one of the two shown in the picture. (Quantity 2)
009.3694	$ 12.00	Small clamp with 2 screw adjustments, one inch width with holding bar. Very good used condition.
009.3704	$ 10.00	Alloy Pliers with flat smooth jaws5.5 inches long, xlnt woring order.
009.3708	$ 20.00	Dumont Swiss #22 pliers for removing collets, these will only work on large sizes of collets.
009.3711	$ 36.00	Pintongue Vise No. 4, possibly over 100 years old,
009.3712	$ 18.00	Morse Twist Drill Gauge, very old, 72 holes, steel.
009.3714	$ 12.00	SUC 4 way Plastic movement holder, very good used condition, one side has wear.
009.3752	$ 19.00	Tweezers Lot of 5 used tweezers, 3 are Swiss made, ready to use or buyer can alter the tips to suit.
009.3761	$ 12.00	Small tool with a hollow cylinder a2d 2 sides with clamp likesides. I am not sure of the intended use but it must be for pshihing something. Let us know if you know its use.
009.3764	$ 6.00	Heller USA smooth burnisher, converted from a file.
009.3767	$ 9.00	Vigor Sweden plyers
009.3769	$ 9.00	Benrus Watch Push Pin tools for FE, 3021, DR, 7026, 2 different, neearly new condtion, one double ended and one single end. Factory sined, see photo. (Quantity 2)
009.3789	$ 12.00	Set of 6 Screw drivers, all different, good used condition.
009.3791	$ 14.00	Hammer with good grip handle and double use head, very good used condition.
009.3795	$ 42.00	Card Jewelers Screwplate #402 in wooden case with 4 dies, die holder, 4 taps, good used condition.
009.3798	$ 5.00	One Bestfit very good used condition #3 screwdriver, with new reversible Blade, Swiss made.
009.3800	$ 5.00	One Bestfit very good used condition #7 screwdriver, with new reversible Blade, Swiss made.
009.3801	$ 5.00	One Bestfit very good used condition #9 screwdriver, with new reversible Blade, Swiss made.

ID/New/Pics	Price	Description
Category 011 - Casing tools, wp testers, related
011.302	$ 4.00	Benrus waterproof crystal removing/inserting wrenches, 2 diff, for fancy shaped crystals 3142 and 7110, with instructions, vgc. (Quantity 3)
011.792	$ 29.00	Special case back opening fixture for Omega Seamaster waterproof case backs,ladies size, 20mm. can use with various tools and adapters for some bregeon openers are available from Bergeon dealers. Picture shows front and back views, one piece is in this lot.
011.796	$ 4.00	Bulova case back opening wrench #N106/112, for Bulova vintage Quartz models with notched case back rings and some others. (Quantity 3)
011.804	$ 15.00	Wyler Case closing ring set in original signed hard case, instructions on inside lid, 4 sizes.
011.811	$ 1.00	Swatch band pin removing and pushing tool, signed, nos. (Quantity 9)
011.819	$ 7.00	K&D case holding tool, metal, will be held by hand or in your bench vise, adjustable, vgc.
011.824	$ 10.00	Waterproof case opening wrench, adjustable, 3 prong with 4 sets of pins, Jaxa style, nm, India, in original wooden case.
011.845	$ 12.00	Crystal lift with adjustable base, larger grip handle, India made, vgc/xlnt with copy of instructions. Similar to Vigor style.
011.848	$ 2.00	Simple style spring bar remover with point pusher and flat end for opening, xlnt.
011.864	$ 5.00	Wooden case holding tool for waterproof gents and ladies ww, can be used for movements also, double sided, adjustable, vgc,
011.883	$ 11.00	Case Opener for slotted wp case backs, inexpensive, all metal, adjustable, 2 prongs, vgc.
011.932	$ 7.00	Pocket size screw back case opener, double sided for different slots, adjustable, well made.
011.960	$ 42.00	Box with BB-504 Fixtures, 10 are tapered/reversible and 3 are flat for pushing crystals, case backs etc. All dies are like new.
011.962	$ 239.00	Sturdy HR type tool for opening and closing cases and case backs, work horse is in good used condition with 4 case holders and 3 sets with 2 each of pins for case opening.
011.964	$ 18.00	Crystal removing/installing tool in very good condition, fits many sizes, easy to use.
011.965	$ 12.00	Case back tool for opening some backs, xlnt used condition, 2 different rubber grip ends.
011.965	$ 12.00	Tool with 2 different rubber ends for opening some case backs and more, nealy new condition, good low price.
011.966	$ 18.00	Movado Tool for removing Crystals, etc., Very good used condition, signed. I can send a photo if wanted

ID/New/Pics	Price	Description
Category 017 - Jewelry related tools
017.128	$ 18.00	Beaver Finger Ring Cutter
017.228	$ 3.00	Scraper, straight edged 3 sided steel with wooden handle, Machinest type, vgc..
017.238	$ 15.00	Moe Diamond Weight Calculator set with special gauge and calculation book, nm set, accurate. (Quantity 2)
017.245	$ 3.00	Newall cross lock self closing tweezers, nos, p&i, 6 inches+ long.
017.270	$ 14.00	Jo-Di Diamond Weight Calculator set with special gauge and calculation book, nice set, accurate, nm.
017.284	$ 11.00	Hamilton pennyweight scale, budget model, 0-35 dwt. with scale, vgc. Picture is a sample of a like item. Good for weighing your scrap metal, etc. (Quantity 3)
017.289	$ 12.00	Stone setting pliers, Vigor, Germany, xlnt, for bending prongs over with good control and power.
017.297	$ 7.00	Ring stick, solid steel, sizes marked from 0-13, vgc but slight surface discoloration.
017.351	$ 15.00	Vigor No. EN-775/32 set of 2 end stops for your engraving machine, nos, p&i.
017.352	$ 8.00	Vigor No. EN-1539/2 end stop for your engraving machine, one piece, nos, p&i.
017.353	$ 18.00	Vigor No. EN-11165 stylus for your engraving machine, nos, p&i.
017.360	$ 10.00	Moe Diamond Weight Calculator set with special gauge and calculation book, vgc set, accurate. (Quantity 2)
017.372	$ 10.00	Stone setting pliers, very old style, vgc, 5 inch. (Quantity 2)
017.378	$ 8.00	Ring finger sizing set with sizes from 1 to 13mm by 1/2 sizes for determining finger size for thinner rings, vgc.
017.392	$ 14.00	Vigor ring finger cutter, safely removes stuck rings, vgc/xlnt, old quality, all metal, French made.
017.395	$ 3.00	Locking forceps for steming, heating, etc., 6 inches long, vgc.
017.408	$ 5.00	Set of ring finger sizes, 0-13 by 1/2 sizes, metal, vgc.
017.410	$ 5.00	Kaplan and Bleicher stone and ring gauge with sliding micrometer and lots of information and gauges, approx 7.25 inches long, vgc. Picture shows one of many, styles vary slightly for the same gauge.
017.413	$ 4.00	Very large straight burnishing tool, for burnishing metal to set stones, jewels, and for other applications where metal is burnihesd and formed, 4 inch steel blade and 4.5 inch wooden handle, xlnt.
017.433	$ 14.00	Engraving block holder parts, set of 4 as shown, pins for your block holes are 3.6mm o.d., xlnt.
017.441	$ 11.00	Busch Hart Burrs, 11 pc., different sizes, cased, vgc or better.
017.442	$ 9.00	Busch Hart Burrs, 12 pc., different sizes, cased, a few are worn, rest are vgc or better.
017.443	$ 7.00	Grobet Hart Burrs, 6 pc., different sizes, cased, vgc or better.
017.444	$ 7.00	Grobet Bud Burrs, 6 pc., different sizes, cased, vgc or better.
017.445	$ 7.00	Grobet Cup Burrs, 6 pc., different sizes, cased, vgc or better.
017.446	$ 9.00	Swiss made cup Burrs, 6 pc., and 2 pc hart burrs, different sizes, cased, vgc or better.
017.447	$ 15.00	Dental Burrs, 5 packages with 6 piece per pkg, 4 pkg are nos and one is open but at least xlnt to nos, p&i, Swiss and USA made.
017.451	$ 7.00	Wooden mallet, hardwood head and wooden handle, xlnt/nm, 9 inches long total, old quality, new look.
017.453	$ 7.00	Aluminum ring stick with groove, has sizes up to 13 by 1/4 sizes,nm, well made and very attactive for counter use.
017.459	$ 3.00	Scraper, straight edged 3 sided steel with wooden handle, xlnt, blade part is 1.6 inches long with flat end.
017.460	$ 15.00	Bulova Gem Setting pliers, parallel jaws, high leverage, screw control w/adj stop, original box and instructions, vgc. Picture is a sample, this one is used, very good woking order.
017.486	$ 10.00	Beading tool set, 12 pushers and handle in holder and original box, vgc, old quality, made in France. Picture is a sample.
017.487	$ 12.00	Rathburn wedding ring streching tool, quick and easy to use, vgc, slight surface rust will clean off easily. Picture is a sample, sold by each.
017.490	$ 9.00	Stone setting pliers, HR, Germany, vgc,needs a litlle smoothing of jaw edges, for bending prongs over with good control and power. Picture is a sample of a similar item.
017.491	$ 16.00	Stone setting pliers, Peagle style, HR, German made, vgc, very old.
017.492	$ 4.00	Diamond tweezers with serrated tips for grip, 5.5 inches long, vgc.
017.495	$ 10.00	Burnisher, 2.5 inch curved steel with wooden handle, xlnt, great for stone and jewel setting, tightening, etc. Picture is a sampple.
017.499	$ 9.00	Swartchild Pliers for tightening and loosening clip on earrings, Good quality, 5.25 inches long, excellent used condition.
017.501	$ 4.00	ring clamp
017.502	$ 6.00	Dixon Aluminum ring stick, solid, no groove, has sizes up to 13 by 1/4 sizes, very good used condition, well made. (Quantity 2)
017.504	$ 24.00	Rio Grande No. 113-110 Holding tool, all-metal, hand held vise holds ear posts or settings securely while you set stones without damaging the ear post or head. The vise holds the smallest of settings, even with a post or bail. The black oxidized areas are lightweight anodized aluminum. Excellent used condition.
017.505	$ 21.00	Draw plate, 30 holes, French made, Joubert, old quality, holes are numbered 1 to 30 with one being apprix. 3.6 mm and the smallest hole approx. 1mm at the tight side,
017.509	$ 20.00	Jewelry repair tool lot, one each of new ring inside polishing buff, one ring finger gauge set, some red rouge for polishing, stone gauge, lot of bead tips, special holding tweezers, scrub out brush and stone setting pliers, items are new to very good used conditions.
017.511	$ 18.00	Jewelry repair tool lot, one each of ring inside polishing buff, one bracelet size gauge, wooden tweezers and 2 long holding tweezers, stone gauge, and jewelers saw, items are xlnt to very good used conditions.
017.3767	$ 9.00	Vigor Sweden pliers (Quantity 2)

ID/New/Pics	Price	Description
Category 242 - Staking Set Punches
242.17	$ 5.00	K&D staking set punch #25, vgc at working end, used, may have surface cosmetic blemishes. (Quantity 3)
242.24	$ 6.00	K&D staking set punch #31, vgc at working end, used, may have surface cosmetic blemishes.
242.25	$ 6.00	K&D staking set punch #32, vgc at working end, used, may have surface cosmetic blemishes. (Quantity 3)
242.28	$ 6.00	K&D staking set punch #35, vgc at working end, used, may have surface cosmetic blemishes. (Quantity 2)
242.29	$ 6.00	K&D staking set punch #36, vgc at working end, used, may have surface cosmetic blemishes. (Quantity 2)
242.31	$ 6.00	K&D staking set punch #38, vgc at working end, used, may have surface cosmetic blemishes.
242.43	$ 5.00	K&D staking set punch #55, vgc at working end, used, may have surface cosmetic blemishes.
242.45	$ 5.00	K&D staking set punch #58, vgc at working end, used, may have surface cosmetic blemishes. (Quantity 2)
242.46	$ 6.00	K&D staking set punch #59, vgc at working end, used, may have surface cosmetic blemishes. (Quantity 2)
242.48	$ 6.00	K&D staking set punch #60, vgc at working end, used, may have surface cosmetic blemishes.
242.49	$ 5.00	K&D staking set punch #61, vgc at working end, used, may have surface cosmetic blemishes. (Quantity 2)
242.50	$ 5.00	K&D staking set punch #62, vgc at working end, used, may have surface cosmetic blemishes. (Quantity 2)
242.51	$ 6.00	K&D staking set punch #63, vgc at working end, used, may have surface cosmetic blemishes. (Quantity 2)
242.52	$ 6.00	K&D staking set punch #63A, vgc/xlnt used. (Quantity 3)
242.53	$ 6.00	K&D staking set punch #64, vgc/xlnt. (Quantity 2)
242.54	$ 6.00	K&D staking set punch #65, vgc or better.
242.56	$ 6.00	K&D staking set punch #67, vgc at working end, used, may have surface cosmetic blemishes.
242.59	$ 6.00	K&D staking set punch #70, vgc or better, used. (Quantity 2)
242.60	$ 6.00	K&D staking set punch #71, vgc or better at working end, used, may have surface cosmetic blemishes.
242.62	$ 6.00	K&D staking set punch #72, vgc at working end, used, may have surface cosmetic blemishes. (Quantity 3)
242.64	$ 6.00	K&D staking set punch #73, vgc at working end, used, may have slight surface cosmetic blemishes. (Quantity 3)
242.72	$ 6.00	K&D staking set punch #80, vgc at working end, used, may have surface cosmetic blemishes. (Quantity 3)
242.73	$ 6.00	K&D staking set punch #81, vgc at working end, used, may have surface cosmetic blemishes. (Quantity 2)
242.74	$ 5.00	K&D staking set punch #82, vgc at working end, used, may have surface cosmetic blemishes. (Quantity 2)
242.75	$ 5.00	K&D staking set punch #83, vgc at working end, used, may have surface cosmetic blemishes.
242.77	$ 5.00	K&D staking set punch #85, vgc at working end, used, may have surface cosmetic blemishes.
242.78	$ 5.00	K&D staking set punch #86, vgc at working end, used, may have surface cosmetic blemishes.
242.89	$ 5.00	K&D staking set punch #96, vgc at working end, used, may have surface cosmetic blemishes.
242.90	$ 6.00	K&D staking set punch #97, vgc or better.
242.91	$ 5.00	K&D staking set punch #98, vgc at working end, used, may have surface cosmetic blemishes.
242.93	$ 5.00	K&D staking set punch #100, vgc at working end, used, may have surface cosmetic blemishes.
242.94	$ 5.00	K&D staking set punch #101, vgc at working end, used, may have surface cosmetic blemishes. (Quantity 2)
242.96	$ 5.00	K&D staking set punch #102, vgc at working end, used, may have surface cosmetic blemishes. (Quantity 2)
242.100	$ 6.00	K&D staking set punch #106, very good working order. (Quantity 3)
242.102	$ 5.00	K&D staking set punch #110, vgc at working end, used, may have surface cosmetic blemishes. (Quantity 2)
242.103	$ 5.00	K&D staking set punch #111, vgc at working end, used, may have surface cosmetic blemishes. (Quantity 3)
242.105	$ 5.00	K&D staking set punch #115, vgc at working end, used, may have surface cosmetic blemishes. (Quantity 2)
242.106	$ 5.00	K&D staking set punch #116, vgc at working end, used, may have surface cosmetic blemishes. (Quantity 2)
242.107	$ 5.00	K&D staking set punch #117, vgc at working end, used, may have surface cosmetic blemishes. (Quantity 3)
242.108	$ 5.00	K&D staking set punch #118, vgc at working end, used, may have surface cosmetic blemishes. (Quantity 3)
242.109	$ 5.00	K&D staking set punch #119, vgc at working end, used, may have surface cosmetic blemishes. (Quantity 2)
242.110	$ 6.00	K&D staking set punch #119A, vgc or better at working end, used, may have surface cosmetic blemishes.
242.129	$ 6.00	K&D staking set punch #80, vgc at working end, used, may have surface cosmetic blemishes. (Quantity 6)
242.163	$ 5.00	Marshall staking set punch #A2, vgc at working end, used, may have surface cosmetic blemishes. Also for Moseley, Watch-Craft, Little Giant and Watch-Craft Junior brands. (Quantity 2)
242.165	$ 5.00	Marshall staking set punch #A4, vgc at working end, used, may have surface cosmetic blemishes. Also for Moseley, Watch-Craft, Little Giant and Watch-Craft Junior brands. (Quantity 2)
242.167	$ 5.00	Marshall staking set punch #A6, vgc at working end, used, may have surface cosmetic blemishes. Also for Moseley, Watch-Craft, Little Giant and Watch-Craft Junior brands. (Quantity 2)
242.169	$ 5.00	Marshall staking set punch #A8, vgc at working end, used, may have surface cosmetic blemishes. Also for Moseley, Watch-Craft, Little Giant and Watch-Craft Junior brands. (Quantity 2)
242.171	$ 5.00	Marshall staking set punch #A10, vgc at working end, used, may have surface cosmetic blemishes. Also for Moseley, Watch-Craft, Little Giant and Watch-Craft Junior brands. (Quantity 2)
242.172	$ 5.00	Marshall staking set punch #A11, vgc at working end, used, may have surface cosmetic blemishes. Also for Moseley, Watch-Craft, Little Giant and Watch-Craft Junior brands. (Quantity 2)
242.173	$ 5.00	Marshall staking set punch #A12, vgc at working end, used, may have surface cosmetic blemishes. Also for Moseley, Watch-Craft, Little Giant and Watch-Craft Junior brands. (Quantity 2)
242.174	$ 5.00	Marshall staking set punch #A13, vgc at working end, used, may have surface cosmetic blemishes. Also for Moseley, Watch-Craft, Little Giant and Watch-Craft Junior brands. (Quantity 3)
242.175	$ 5.00	Marshall staking set punch #A14, vgc at working end, used, may have surface cosmetic blemishes. Also for Moseley, Watch-Craft, Little Giant and Watch-Craft Junior brands. (Quantity 2)
242.176	$ 5.00	Marshall staking set punch #A15, vgc at working end, used, may have surface cosmetic blemishes. Also for Moseley, Watch-Craft, Little Giant and Watch-Craft Junior brands.
242.177	$ 5.00	Marshall staking set punch #A16, vgc at working end, used, may have surface cosmetic blemishes. Also for Moseley, Watch-Craft, Little Giant and Watch-Craft Junior brands. (Quantity 2)
242.180	$ 5.00	Marshall staking set punch #A19, vgc at working end, used, may have surface cosmetic blemishes. Also for Moseley, Watch-Craft, Little Giant and Watch-Craft Junior brands. (Quantity 2)
242.182	$ 5.00	Marshall staking set punch #A21, vgc at working end, used, may have surface cosmetic blemishes. Also for Moseley, Watch-Craft, Little Giant and Watch-Craft Junior brands. (Quantity 2)
242.183	$ 5.00	Marshall staking set punch #A22, vgc at working end, used, may have surface cosmetic blemishes. Also for Moseley, Watch-Craft, Little Giant and Watch-Craft Junior brands.
242.184	$ 5.00	Marshall staking set punch #A23, vgc at working end, used, may have surface cosmetic blemishes. Also for Moseley, Watch-Craft, Little Giant and Watch-Craft Junior brands. (Quantity 2)
242.187	$ 5.00	Marshall staking set punch #A26, vgc at working end, used, may have surface cosmetic blemishes. Also for Moseley, Watch-Craft, Little Giant and Watch-Craft Junior brands. (Quantity 2)
242.188	$ 5.00	Marshall staking set punch #A27, vgc at working end, used, may have surface cosmetic blemishes. Also for Moseley, Watch-Craft, Little Giant and Watch-Craft Junior brands.
242.189	$ 5.00	Marshall staking set punch #A28, vgc at working end, used, may have surface cosmetic blemishes. Also for Moseley, Watch-Craft, Little Giant and Watch-Craft Junior brands. (Quantity 2)
242.190	$ 5.00	Marshall staking set punch #A29, vgc at working end, used, may have surface cosmetic blemishes. Also for Moseley, Watch-Craft, Little Giant and Watch-Craft Junior brands. (Quantity 2)
242.199	$ 5.00	Marshall staking set punch #B4, vgc at working end, used, may have surface cosmetic blemishes. Also for Moseley, Watch-Craft, Little Giant and Watch-Craft Junior brands. (Quantity 2)
242.201	$ 5.00	Marshall staking set punch #B6, vgc at working end, used, may have surface cosmetic blemishes. Also for Moseley, Watch-Craft, Little Giant and Watch-Craft Junior brands. (Quantity 2)
242.203	$ 5.00	Marshall staking set punch #B8, vgc at working end, used, may have surface cosmetic blemishes. Also for Moseley, Watch-Craft, Little Giant and Watch-Craft Junior brands. (Quantity 2)
242.205	$ 5.00	Marshall staking set punch #B10, vgc at working end, used, may have surface cosmetic blemishes. Also for Moseley, Watch-Craft, Little Giant and Watch-Craft Junior brands.
242.208	$ 5.00	Marshall staking set punch #B28, vgc at working end, used, may have surface cosmetic blemishes. Also for Moseley, Watch-Craft, Little Giant and Watch-Craft Junior brands. (Quantity 2)

ID/New/Pics	Price	Description
Category 004 - Lathes & related items
004.429	$ 18.00	Index plate lock fitted to a tool rest base, not sure of the application since I did not get the rest of what it ws used with, priced to sell.
004.570	$ 14.00	Balance (balloon) chuck, smaller size for ww, vgc, old quality, fits in your #50 wire collet, for safely turning pivots. Picture is a sample, may be exact item or one very similar. (Quantity 2)
004.628	$ 15.00	Arbor for stones, brushes, buffs, etc, fits lathe motors and others with a 3/8 inch shaft, the wheel held needs a 1/4 inch hole, vgc.
004.640	$ 36.00	Balance (balloon) chuck for use in your 8mm lathe which takes long collets, pw/ww size, vgc.
004.646	$ 49.00	Large lathe draw bar, for 10mm collets, steps are these outer diameters from handle to the open end, 14.8mm, 14.1mm and 11.5mm, 150mm long to the handle, appears to be vgc/xlnt, not sure what it fits.
004.653	$ 15.00	Small L shape rest or jewelling rest, shaft is 5.55mm o.d. and can be used as needed for supporting items to work on, file, etc, xlnt. Sold by each. (Quantity 2)
004.679	$ 49.00	Balance (Balloon) chuck with larger than normal hole and long spring bar holding ability, 8mm, long, conoidal, vgc.
004.737	$ 21.00	Crank handle for unknown model, see pictures and ask questions if you think it will work for you, xlnt condition.
004.807	$ 22.00	Double belt drive wheel, excellent condition, hole is approx. 6mm, nearly 1/4 inch. (SA)

ID/New/Pics	Price	Description
Category 008 - New tools of all types
008.140	$ 6.00	Screw plate for stems and crowns, etc., with 5 holes and 5 taps, popular sizes, single cut out slot. India. (Quantity 4)
008.150	$ 7.00	Pliers with one round jaw and one nylon flat jaw, for forming, etc., padded grips, 5 � inches, NEW, India.
008.151	$ 3.00	Diamond, loose stone or parts scooper, polished metal, NEW, approx. 3 inch by 2 inch.
008.173	$ 4.00	JSP Pliers #PL150, chain nose, smooth jaws, padded grips, lap joint, 4.5 inches, economy European quality, NEW. (Quantity 8)
008.174	$ 4.00	JSP Pliers #PL170, chain nose, fine thinner smooth jaws, handy grip with spring return,4.5 inches, economy quality, NEW. (Quantity 10)
008.175	$ 8.00	JSP Ring holding pliers #PL126, padded grips, can also be used for forming some bows, rings, etc., NEW, good quality. (Quantity 9)
008.184	$ 2.00	Hard bristle brush with wooden handle, 3 rows, for cases, bracelets, clock pinions, etc, old quality, nm/nos. (Quantity 5)
008.190	$ 4.00	Dixcel Unmounted bristel Brushes #16.660, for polishing, 3/4 inch, soft, 12 pc. pasckage, nos, p&i, top quality. Use your mandrell for 3/32 inch hole. (Quantity 6)
008.192	$ 3.00	Vigor BU-806 Bristle Brushes with metal hub , 1 7/8 inch diameter, 3 pieces in pkg, NEW, (Quantity 2)
008.194	$ 4.00	HR 16.713 Dixcel stiff end brushes with 5/8 x 3/32 inch shank, package of 12 pc., NEW, p&i. (Quantity 2)
008.198	$ 4.00	Vigor BF726 Yellow Muslin Buff, 6 inch, razor edge, New. (Quantity 2)
008.199	$ 9.00	Grobet No. 17.561 Yellow Muslin Buffs, 6 inch, Chencote knife edge, 3 pc., New. (Quantity 3)

ID/New/Pics	Price	Description
Category 010 - Jewelling tools of all types
010.391	$ 7.00	Hollow Pusher #75, vgc, used, 4mm o.d. base fits all modern Seitz sets. (Quantity 2)
010.396	$ 6.00	Seitz Flat Pusher #125, vgc, used, 4mm o.d. base fits all modern Seitz sets. (Quantity 2)
010.398	$ 6.00	Seitz Flat Pusher #175, vgc, used, 4mm o.d. base fits all modern Seitz sets.
010.399	$ 6.00	Seitz Flat Pusher #195, vgc, used, 4mm o.d. base fits all modern Seitz sets.
010.400	$ 6.00	Seitz Flat Pusher #255, vgc, used, 4mm o.d. base fits all modern Seitz sets.
010.407	$ 8.00	Seitz Pump Pusher #115, vgc, used, 4mm o.d. base fits all modern Seitz sets.
010.419	$ 6.00	Seitz Concave Pusher #115, vgc, used, 4mm o.d. base fits all modern Seitz sets. (Quantity 1)
010.433	$ 10.00	Seitz Jewel hole reamer #149, vgc or better, used, base fits all Seitz sets.
010.435	$ 10.00	Seitz Jewel hole reamer #179, vgc or better, used, base fits all Seitz sets. (Quantity 2)
010.436	$ 10.00	Seitz Jewel hole reamer #199, vgc or better, used, base fits all Seitz sets. (Quantity 2)
010.437	$ 10.00	Seitz Jewel hole reamer #229, vgc or better, used, base fits all Seitz sets. (Quantity 2)
010.438	$ 10.00	Seitz Jewel hole reamer #259, vgc or better, used, base fits all Seitz sets. (Quantity 1)
010.440	$ 10.00	Seitz Jewel hole reamer #299, vgc or better, used, base fits all Seitz sets. (Quantity 6)
010.590	$ 12.00	Horia pump pusher, 3mm base, B=0.95mm and A=0.50mm, vgc. See sample picture.
010.629	$ 12.00	Set of 6 Jewel chucks in wooden case, good used condition, see picture.
010.630	$ 6.00	Burnisher, 2.5 inch curved steel with smooth wooden handle, six inch handle, xlnt, great for stone and jewel setting, tightening, etc.
010.634	$ 35.00	Watch-Craft Friction Jeweling Chucks set, complete, could use a little cleaning up but all parts are there. C&E Marshall. (Quantity 3)
010.636	$ 12.00	Combination tool for warming, annealing, setting roller jewels and more, very good used condition.

ID/New/Pics	Price	Description
Category 013 - Balance and escapement related tools
013.687	$ 12.00	Waltham 6/0 size escape wheel.
013.1186	$ 20.00	Balance screw/timing washer holder/sorter tray, vgc or better. Keeps your balance wheel work organized. Picture shows 2 samples of the 4 pieces posted. Sold by each. (Quantity 3)
013.1285	$ 10.00	Shop made brass top table with stand and holes for various bench work. Sold by each.
013.1421	$ 12.00	Shop or School made poising tool for wheels and balances, very old, ww/pw.
013.1543	$ 12.00	Swiss Simple truing calipers for wristwatches, very good or better used condition, sold by each. (Quantity 3)
013.1561	$ 18.00	Horolover 400-Day Clock Beat-Setting Tool, for putting the pendulum in beat, good used condition.

ID/New/Pics	Price	Description
Category 015 - Equipment, timers, cleaners, benches, etc
015.318	$ 3.00	Timing paper, plain style for machines with ink ribbon which use 38mm wide paper, nos roll. (Quantity 2)
015.534	$ 7.00	Eveready Watch Battery tester, tests 1.35V and low and high drain silver, simple and easy.
015.687	$ 4.00	Timing paper, plain style for machines with ink ribbon which use 37.4mm wide paper, nos roll. (Quantity 3)
015.688	$ 18.00	Peer cleaning machine basket holder with shaft for old square jar model, xlnt.
015.693	$ 15.00	Power Unit foot control reostat, NEW, has 6 pin type round plug, not sure what it works with.
015.724	$ 12.00	Sewing motor, goes one direction, has on and off switch, works well, 0.9Amps, USA made.
015.755	$ 21.00	Set of 10 weights in grams for balance scales, wooden holding block, xlnt/nm, 1 to 100 grams, one is not marked.
015.786	$ 29.00	Flex shaft hand piece with spring for flexibity, no. 5D, not sure of maker, very good used condition.