| Staking Tools |
Part # |
Photo |
Description |
Price |
| wt11160 |  |
1.4mm sub punch holder. (10 available) | $12.00 |
| wt10468 |  |
1.4mm sub punch holder. Some rust. | $8.00 |
| wt11010 |  |
Set of 3 centering stakes. K&D compatible width. Tips need sharpening. | $10.00 |
| wt11001 |  |
Centering stake. 84mm long. A bit large for K&D at 4.75mm. | $10.00 |
| wt10361 |  |
Centering stake. A bit large for K&D at 4.75mm. | $10.00 |
| wt10357 |  |
Centering stake. A bit large for K&D at 5.0mm. | $10.00 |
| wt10463 |  |
Stake puller. A little bent up, but still functional. | $5.00 |
| wt10331 |  |
Interesting flat stake set with screw-in tips. At 4.70mm, it is just a hair too thick to fit a K&D set. | $25.00 |
| wt10351 |  |
No-name staking base. Compatible with K&D stakes. Table doesn't want to tighten, so it needs some attention. Additional shipping charge applies. |
$30.00 |
| wt9032 |  |
Small early painted K&D staking base. (Missing the table, so just a nice early display piece.) Additional shipping charge applies. |
$15.00 |
| wt9037 |  |
Small staking base. Missing locking lever. Additional shipping charge applies. |
$20.00 |
| wt10368 |  |
'NIT' staking set base. The stake hole is compatible with K&D stakes. The hole for stumps is not (too big). (4 available) Additional shipping charge applies. |
$20.00 |
| wt5121 |  |
Breitling 900.261 stake. | $20.00 |
| KDStake | The following K&D stakes are available: 10(4), 13, 14(3), 17, 18, 25(6), 31(2), 32(7), 33(2), 34(4), 35, 36(3), 38(2), 48, 54(2), 56(2), 58(6), 59(11), 60(6), 61(7), 62(4), 63(7), 63A(3), 64(9), 65(8), 66(5), 67, 69(5), 70(4), 71(5), 72(4), 73(5), 75, 76, 77, 79, 80(11), 81(4), 82(3), 83(6), 84(5), 85(3), 86(3), 88(6), 89(7), 90(4), 91(2), 92(3), 93(8), 94(7), 95(10), 96(8), 97(5), 98(4), 99(5), 100(3), 101(8), 102(5), 103(3), 106(3), 107, 108(3), 110(5), 111(8), 115(9), 116(8), 117(7), 118(8), 119(6), 119A(3) | $5.00 each | |
